Anchor-Electronics(408) 727-3693 • fax 408-727-4424 hours: mon-fri 7:30-4:00 sat 10:00-3:00

Description
Handi-Vac kit, static dissipative, with conductive silicone vacuum cups. 1/8" and 1/4" vacuum cups on bent probes and 1/8" and 3/8" vacuum cups on straight probes. ESD safe and made in the USA.

Virtual Industries' Handi-Vac kits are a low cost pick-and-place tool that can go in everybody’s tool box.

Operation
1. Select a tip with a rubber vacuum cup on a probe that is slightly smaller than the part you want to pick and place. Put the probe snuggly on the tip of the Handi-Vac tool. Make sure that there is no dust on the rubber vacuum tip.  NOTE: Our larger rubber vacuum cups can be placed directly on the Handi-Vac tip without using a probe.
2. Gently squeeze the Handi-Vac bulb, place the soft suction cup squarely on the pick-and-place part, then relax your squeeze. The part is now firmly gripped.
3. Move the part to where you need it and a second squeeze of the bulb releases the part.

Applications
Applications for this tool include SMT parts, metal parts, plastic parts or any item having a smooth-nonporous-surface that the rubber vacuum tweezer tip can seal against. This tool can be used with any of our rubber vacuum cups ranging in size from 3/32” (2.38mm) to 3/4” (19.05mm) in diameter. Use the larger cups to pick up larger and heavier parts. For even more precision in part placement see our PEN-VAC self-contained vacuum pen.

Availability: In-Stock
Price: $16.35