10-Pin Grabber Clip Split Cable


This cable has a 10-pin box header that attaches to the ribbon cable. Each individual lead has a different color and is labeled with the pin name so that they are easy to identify.

Each pin has a grabber clip at the end with the following dimensions. The entire clip is nominally 44mm long. The cap body width is 2.54mm wide and roughly 21.5mm long. The hook of the grabber clip is is 0.51mm wide with a maximum opening of 3.18mm.

The connector is a standard 5×2 0.100″ (2.54mm) pitch IDC type keyed box connector. Each individual lead is terminated with a single pin crimp connector with the same 0.100″ (2.54mm) pitch. The cable is only 5″ (12.7cm) long to minimize signal degradation.

3 in stock

SKU: TP240411 Category: